![]() ![]() ![]() You can create certain scenes and groups on Go Smart App, it allows you to control different smart devices in different rooms at the same time. Note: edit the default names in this interface, for better management. –>Wait till successful configuration and then tap “Completed”. –>Tap “Connect now” and choose Wi-Fi hotspot named “SmartLife-xxx”, then go back to Go Smart application –>Choose your 2.4G Wi-Fi and enter the password and confirm it in App –>Make sure the indicator light is flashing slowly and confirm it in App –>Long press on/off button until the indicator light flashes slowly > First go back to the Add Device “+” interface, choose the AP Mode on the upper right corner. Once you see the indicator light slowly blink(every 7 seconds ), you can start to try the AP mode connection. When you make sure the indicator light is quickly blinking again for Easy mode, hold the power button for about 7seconds to plug to AP mode. #Smartapp code install> Set a unique name for this smart plug, choose the room location.ī: AP Mode(Indicator light blinks once every 2 seconds ) If the Easy mode connection failed, please remove and install the smart plug into your power outlet again. ( If you don’t see blue light quickly blinking, press the On/Off button to reset.) > Confirm the light status on your plug and follow the App guide. > Confirm that the smart plug is well installed If you are using a dual Wi-Fi router but it broadcasts only 1 Wi-Fi signal, you will have to manage your Wi-Fi router and change the settings to have 2.4GHz Wi-Fi.Ī: For Easy Mode Connection- Blue indicator Light Blink Rapidly ( Twice a second ). If you are using a dual Wi-Fi router and it broadcast 2 Wi-Fi signals, make sure that your phone was connected with the 2.4GHz Wi-Fi signal, it should be the Wi-Fi signal that is next to “_5G”.ģ. ☆ Connect with Your Cellphone Requirements: 2.4GHz Wi-Fi condition at homeġ.If you only have a 5GHz Wi-Fi router, you will not be able to complete the connection.Ģ. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |